Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2021-10-20 06:07
452
Company Profile
By certification [File Integrity]
Contact：tytkj(Mr.)
Email：
Telephone：
Phone：
Area：Beijing
Address：Beijing
Drop in Isolator
Drop in isolator is connected with instruments and equipment by strip line. It can be dual junction even three for higher isolation. The third end of the drop in isolator will have attenuation chip or RF resistor.
Drop in isolator adopts discrete cavity and integrated cavity, and uses strip line connection, which can withstand large power. If the strip line is connected to the connectors, it will become a coaxial isolator. The drop in isolator made of high-quality materials to ensure the best performance over the entire temperature range. Reliability, price and manufacturability were optimized during the design phase. In order to ensure that the magnetic field is stable and does not fluctuate with temperature, all RF isolators will be tested in the high and low temperature alternating damp heat temperature test box. Then, engineers will strictly inspect each product through vector network analyzer equipment.
Now day, drop in isolator is widely used in GSM, CDMA or TD-SCDMA (GG) and other mobile communication base stations and mobile station systems. It is mainly used as a common device (duplexer or multiplexer) for receivers and transmitters, or as an isolator for input and output isolation of power amplifier and switching amplifier in transmitting and receiving systems and decoupling in measurement systems. It belongs to non reciprocal transmission device
RFTYT is Professional Customized RF Components Manufacturer with long history of producing RF Isolator, RF Circulator, RF Resistor, RF Attenuation Chip, Coaxial Load (Dummy Load), Coaxial Attenuator, RF Filter, RF Diplexer, RF Combiner, RF Coupler, Power Divider, Bridge, RF Amplifier, Coaxial Cable and other microwave communication products. RFTYT provides a series of drop in isolators with various sizes and frequency bands, which are specially designed for communication applications, military applications, cellular and wireless markets.
RFTYT 10MHz-26.5GHz RF Drop in Isolator
Model |
Frequency |
Forward Power(max) |
Reverse Power |
Size |
Connection |
Data |
WG6466E |
30-230 MHz |
150 W |
10-150 W |
64.0*66.0*22.0 mm |
TAB |
|
WG6060E |
30-230 MHz |
100 W |
10-100 W |
60.0*60.0*25.5 mm |
TAB |
|
WG7070X |
130-200 MHz |
500 W |
10-250 W |
70.0*70.0*15.0 mm |
TAB |
|
WG5050X |
160-330 MHz |
500 W |
10-100 W |
50.8*50.8*15.0 mm |
TAB |
|
WG4545X |
300-1100 MHz |
500 W |
10-100 W |
45.0*45.0*13.0 mm |
TAB |
|
WG3546X |
300-1850 MHz |
300 W |
100 W|30,20 dB |
35.0*46.0*11.0 mm |
TAB |
|
WG3538X |
300-1850 MHz |
300 W |
10-100 W |
35.0*38.0*11.0 mm |
TAB |
|
WG2532X |
350-3600 MHz |
250 W |
100 W|30,20 dB |
25.4*31.7*10.0 mm |
TAB |
|
WG2525X |
350-4000 MHz |
250 W |
10-100 W |
25.4*25.4*10.0 mm |
TAB |
|
WG2027X |
600-3600 MHz |
150 W |
100 W|30,20 dB |
20.0*27.5*8.6 mm |
TAB |
|
WG2020X |
600-4000 MHz |
150 W |
20 W |
20.0*20.0*8.6 mm |
TAB |
|
WG1925X |
800-3600 MHz |
100 W |
100 W|30,20 dB |
19.0*25.4*8.6 mm |
TAB |
|
WG1919X |
800-4000 MHz |
60 W |
20 W |
19.0*19.0*8.6 mm |
TAB |
|
WG6466E |
950-2000 MHz(full) |
100 W |
10-100 W |
64.0*66.0*26.0 mm |
TAB |
|
WG1313T |
1800-6000 MHz |
60 W |
10 W |
12.7*12.7*7.2 mm |
TAB(Through hole) |
|
WG1313M |
1800-6000 MHz |
60 W |
10 W |
12.7*12.7*7.2 mm |
TAB(Screw hole) |
|
WG3234A |
2.0-4.0 GHz(full) |
100 W |
20 W |
32.0*34.0*21.0 mm |
TAB |
|
WG1626D |
3.7-5.0 GHz |
60 W |
5 W |
16.0*26.0*10.5 mm |
TAB |
|
WG1623D |
5.0-7.0 GHz |
100 W |
5 W |
16.0*23.0*9.7 mm |
TAB |
|
WG1220D |
5.0-7.0 GHz |
50 W |
5 W |
12.0*20.0*9.5 mm |
TAB |
|
WG0915D |
7.0- 8.0 GHz |
30 W |
5 W |
8.9*15.0*7.8 mm |
TAB |
If the frequency range you need is not covered in the form, please contact us for details.
Since the isolator needs to be customized according to your needs, please provide the following requirements when you send us inquiry:
(Mark * is necessary needed)
*1. The frequency range you need.
*2. Power requirements (forward, reverse, etc.).
*3. Connector type
*4. Your special requirements if you have (insertion loss, isolation, VSWR, temperature, size, etc.)
http://www.rf-tyt.com/
