Centrifugal Ventilator

Product details

 XH-CL-20 Low pressure centrifugal fan

Product Introduction
XH-CL-20 centrifugal ventilator can be used for indoor ventilation and ventilation in general factories and large buildings. It can be used to import or export gas of the kind of air or other non-spontaneous combustion, non-self-detonation, no winding, Gases that are harmless to human health and not corrosive to iron and steel materials. There is no viscous substance in the gas, and the dust and hard particles are no more than 150 mg / m ~ (3). Gas temperature must not exceed 80 ℃, other similar performance can be selected.

Form
Fan can be made into clockwise rotation or counter-clockwise rotation two types. Facing squarely from one side of the motor, the impeller rotating clockwise is called the cyclones, which is expressed as "clockwise", and vice versa, as "inverse". 

Structure
The 3A-6A of theXH-CL-20 low pressure centrifugal fan is mainly composed of the housing, impeller, inlet and motor. In addition to the above part, the 7C-20E also has the transmission part.
Impellers-consisting of backward arc thin plate blades, curved front plates and flat plates, all made of steel plates and corrected by static and dynamic balance, with good air performance, high efficiency, low noise and smooth operation. 4. 4. 5 is composed of 14 leaves and more than 5 is composed of 16 pieces.
Housing-made into two different types, the 3-12 housing is integrated and can not be disassembled; the 14-20 housing is made into two open types, divided in two halves along the middle horizontal plane and connected by bolts.
Inlet-made into a whole, installed on one side of the fan, parallel to the axial section of the curve shape, can make the gas enter the impeller smoothly, and the loss is relatively small.
Transmission-consists of spindle, bearing box, rolling bearing and belt wheel.

Product Parameter
XH-CL-20 Low pressure centrifugal fan

http://www.xinhuablower.com/